Ethernet RJ45 Male Plug Terminal Block
5,82 €
- Description
- Additional information
Description
If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that with an Ethernet Jack – this adapter will come in very handy! No soldering required. Just use a slim screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire and re-tighten. Note that these aren't recommended for actual Ethernet traffic, especially long term…but for basic power/data distribution, RJ45's are great!
This is the Ethernet (RJ45) Male Plug Terminal Block. There is a standard RJ45 Ethernet plug on one end, and a screw terminal block on the other.
We also have a (matching) Ethernet Female Jack Terminal Block.
Length (end to end): 53.9mm / 21.2″
Weight: 17.7g
INFO:
Pagina del Produttore
Additional information
| Weight | 0,05 kg |
|---|---|
| Dimensions | 5 × 1 × 3 cm |
| BRAND | Adafruit |
