2-Channel Isolated RS232 Expansion HAT for Raspberry Pi
19,18 €
- Description
- Additional information
Description
2-Channel Isolated RS232 Expansion HAT For Raspberry Pi, SC16IS752+SP3232 Solution, With Multi Onboard Protection Circuits
Overview
This is a 2-channel isolated RS232 expansion HAT designed for Raspberry Pi, adopts the SC16IS752+SP3232 solution, with embedded protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc.
It is easy to control the 2-channel RS232 via SPI interface. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for fields like industrial automation.
Features
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Adopts SC16IS752+SP3232 dual chip combination, converts SPI to RS232, data rate up to 921600bps
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
- Onboard LEDs for indicating the power and transceiver status
- Breakout SPI control pins, for connecting with host control boards like Arduino
- Comes with development resources and manual (examples in C and Python)
Specifications
- UART expansion chip: SC16IS752
- RS232 transceiver: SP3232
- Communication interface: SPI
- Data rate: 300 ~ 921600 bps
- Operating voltage: 3.3V / 5V
- Dimensions: 65mm × 56.5mm
- Mounting hole size: 3.0mm
What’s on Board
- SC16IS752 UART expansion chip
- SP3232 RS232 transceiver
- ADUM1412 digital isolator
- B0505LS power supply isolation module
- RT9193-33 power chip
- Raspberry Pi GPIO connector: for connecting Raspberry Pi
- MCU control header: for connecting host control boards like Arduino
- RS232 connector: 2 channels RS232 interface (RS232 9PIN male)
- Transient suppress diode array
- ESD protection two-way diode
- Serial port status indicator
RXD1/TXD1: channel 1 transceiving indicator
RXD2/TXD2: channel 2 transceiving indicator - Power indicator
- Interrupt pin switch
The interrupt pin IRQ is connected to P5 (BCM P24) by default
Changeable via 0R resistor
Example
Note: the Raspberry Pi and serial cables are NOT included.
Pinouts
| PIN | RASPBERRY PI (BCM) | DESCRIPTION |
|---|---|---|
| VCC | 5V | 3.3V/5V power supply |
| GND | GND | Ground |
| SCK | P21 (SPI1 SCLK) | SPI clock input |
| MOSI | P20 (SPI1 MOSI) | SPI data input |
| MISO | P19 (SPI1 MISO) | SPI data output |
| CS | P18 (SPI1 CS) | SPI chip select |
| IRQ | P24 | Interrupt output |
Dimension
Package Content
- 2-CH RS232 HAT x1
- 2x20PIN female pinheader x1
- RPi screws pack (2pcs) x1
Resources
Documentation
Demo code
Additional information
| BRAND | Waveshare |
|---|
