Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B and 802.3af PoE network - Image 1
Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B and 802.3af PoE network - Image 2
Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B and 802.3af PoE network - Image 3
Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B and 802.3af PoE network - Image 4
Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B and 802.3af PoE network - Image 5
Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B and 802.3af PoE network - Image 6

Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B and 802.3af PoE network

Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B and 802.3af PoE network

21,85 €

In stock

21,85 €

Availability: 1 in stock SKU: WS-18014 Categories: , Tags: , ,
Aggiungi alla lista dei desideri

Description

POE HAT FOR RASPBERRY PI

Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant with OLED for real-time monitoring temperature, IP, and fan status.

The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.

Features At A Glance
  • Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B
  • PoE (Power Over Ethernet) capability，802.3af-compliant
  • Fully isolated switched-mode power supply (SMPS)
  • 0.91″ OLED, for monitoring processor temperature, IP address, and fan status in real-time
  • Onboard cooling fan, allows auto running on powerup OR programmable control, configured by switch
  • Integrates PCF8574 IO expander for I2C bus, providing pin P0 for directly fan control, and more spare IO pins
For Use With Raspberry Pi 3B+/4B

Standard Raspberry Pi 40PIN GPIO Stackable Header, Allows Connecting Other HATs

Power Over Ethernet

Providing Both Network Connection And Power Supply For Your Raspberry Pi In One Cable

* proper 802.3af-compliant power sourcing equipment is required

 

0.91″ OLED Display

128 × 32 Pixels, I2C-Bus Controlled
Monitoring Processor Temperature, IP Address, Fan Status In Real-Time

Cooling Fan

Allows Auto Running On Powerup OR Programmable Control, Configured By Switch
Automatically Turn On/Off Depending On The Raspberry Pi Processor Temperature

Onboard PCF8574 Chip

PCF8574 IO Expander For I2C Bus, Providing 8 IO Pins, Of Which P0 For Fan Control
And Extra Spare Pins On Solder Pads (P1-P7, INT)

Pinout

Package Content

  1. PoE HAT (B) x1
  2. Standoffs pack x1

Resources

Documents

Example

Additional information

BRAND

Waveshare
Specifications
POE POWER INPUT 37V ~ 57V DC in OLED SIZE 0.91″
POE POWER OUTPUT 5V 2.5A DC out OLED PIXELS 128×32
NETWORK STANDARD 802.3af PoE OLED DRIVER 1306
DIMENSIONS 56.5 × 65mm OLED DISPLAY COLOR white

You may also like…